Blog
Compatible SFP Module and Patch Cable for MikroTik RB260GS series Switch
Jan
The RB260GS series launched in early 2019 and quickly became a favorite small SOHO switch for home and small-office networks. There are two versions: the basic RB260GS and the RB260GSP, which can also power other devices through its Ethernet ports. That means ports 2 to 5 can send power to PoE devices without needing extra power supplies.
Both models have five Gigabit Ethernet ports and one SFP fiber module slot. Inside, they use a simple switch chip to handle all the traffic, also giving users the freedom to choose third-party-compatible optics, enabling them to build stable fiber links without being limited to vendor-branded accessories.
These switches run a system called SwOS, which is built just for MikroTik’s switch products. You don’t need any special software to configure them — everything is done in your web browser. SwOS gives you all the core features you’d expect from a managed switch, and then some. You can control how traffic moves between ports, block or allow certain devices with MAC filters, set up VLANs, mirror traffic for troubleshooting, limit bandwidth on ports, and even tweak certain packet header settings.
MikroTik RB260GS & RB260GSP Switch Overview
# Compact Size with Gigabit and Fiber Support
Both models come with five Gigabit Ethernet ports and one SFP slot. This makes it easy to connect regular network devices while keeping a fiber uplink for longer distances or cleaner cabling.
# Simple Web-Based Management
The switches run SwOS, a system made especially for MikroTik switches. Everything is set up through a web browser, so users do not need command lines or special tools to get started.
# Practical Features for Daily Use
SwOS includes the features most small networks actually use. You can control how ports forward traffic, create VLANs, limit bandwidth, or mirror traffic when you need to check what is happening on the network.
# PoE Output Option for Flexible Deployment
With the RB260GSP model, powering devices like wireless access points or IP cameras becomes easier. The built-in PoE output reduces cable clutter and simplifies installation in tight spaces.
# Silent and Low-Power Design
The fanless design allows the switch to run silently. It fits well on a desk or shelf and works nicely in offices or home environments where noise is not welcome.
Compatible with MikroTik RB260GS and the RB260GSP
To ensure stable operation of the RB260GS and the RB260GSP over fiber links, compatible SFP modules and patch cords are essential. Many of our products are compatible with the RB260GS and the RB260GSP. The following list is provided for your reference.
| Part Number | Description |
| 1G SFP Module | |
| S-RJ01 | MikroTik S-RJ01 Compatible RJ45 SFP 10/100/1000M Copper Module |
| S-85DLC05D | MikroTik S-85DLC05D Compatible 1.25G Multimode 550m DDM SFP Transceiver |
| S-31DLC20D | MikroTik S-31DLC20D Compatible 1.25G Single Mode 20km DDM SFP Transceiver |
| S-31DLC40D | MikroTik S-31DLC40D Compatible 1.25G Single Mode 40km DDM SFP Transceiver |
| S-55DLC80D | MikroTik S-55DLC80D Compatible 1.25G Single Mode 80km DDM SFP Transceiver |
| S-3553LC20D | MikroTik S-35LC20D Compatible 1000BASE-BX SFP BiDi 1310nm-TX/1550nm-RX 20km Transceiver |
| S-35LC20D | MikroTik S-35LC20D Compatible 1G BiDi SFP 1310nm-TX/1550nm-RX 20km Transceiver |
| S-53LC20D | MikroTik S-53LC20D Compatible 1G BiDi SFP 1550nm-TX/1310nm-RX 20km Transceiver |
| S-35LC40D | MikroTik S-35LC40D Compatible 1G BiDi SFP 1310nm-TX/1550nm-RX 40km Transceiver |
| S-53LC40D | MikroTik S-53LC40D Compatible 1G BiDi SFP 1550nm-TX/1310nm-RX 40km Transceiver |
| S-45LC80D | MikroTik S-45LC80D Compatible 1G BiDi SFP 1490nm-TX/1550nm-RX 80km Transceiver |
| S-54LC80D | MikroTik S-54LC80D Compatible 1G BiDi SFP 1550nm-TX/1490nm-RX 80km Transceiver |
| Fiber Patch Cable | |
| LC-LC-OM2-DxM | LC-LC 50/125μm OM2 Multimode Duplex PVC Fiber Optic Patch Cable(1m-50m or Custom Length) |
| LC-LC-SM-DxM | LC-LC 9/125 OS2 Singlemode LSZH Duplex Fiber Patch Cable(1m-50m or Custom Length) |
| MC-LC-LC-OM2-DxM | LC/LC Duplex 50/125μm Mode Conditioning Fiber Optic Cable (MCP, 1m-50m or Custom Length) |
Conclusion
The MikroTik RB260GS and RB260GSP are smart switches built for SOHO and light network environments. Compared with enterprise-grade Gigabit switches from Cisco or Juniper, they are cheaper, consume less power, and are more compact. Looking at it from a vertical comparison, these switches are easier to install, quieter, and the SwOS web interface is simpler to use than MikroTik’s CRS106 series.
You don’t have to worry about just the ports or PoE. The RB260 switches work well with compatible OPTCORE SFP modules and fiber patch cables. This lets you set up flexible fiber links without being stuck with the vendor’s own modules. Check our website to see which OPTCORE products have been verified for RB260. They help keep your fiber connections stable, even in a small network.
